We add a roof top AC unit
Page 3
On to page 4, back to page 1 | page 2
The hard part is done - we routed the wire to here in the OnePlace
At the top of the OnePlace panel, drill at least a 2" hole in the ceiling so you will have room to fish the wire to the 14" x 14" opening. This hole enters the existing ceiling duct run
Time to remove the Fantastic Fan trim and tag/cut the fan wiring. The fan will be removed in a later step
It really helps to use a fish stick (not the breaded kind ;-) ) to ram a tunnel through the Styrofoam ceiling insulation to the previously cut hole above the OnePlace area. I also extended the fan wiring through the left side ceiling AC duct and brought it out a forward vent (see next picture)
I extended the Fantastic Fan wiring forward - the plan is to relocate the fan to this general area
Wiring is ready! Time to get on the roof!